Bows!

These can be used for a variety of things, embellishing hats, a brooch or what I am doing is putting them on hair clips for my sister. I made her a couple last year to wear to work and she asked for more for her 22nd Birthday. I decided to write the pattern as I made them this time. They are slightly different than the first lot I made and I haven't attached them to clips yet but I will get photos of that when I do it.

Materials:

4.00 mm crochet hook

DK 8ply yarn

Any hook and yarn will work but that is what I used to get a bow that is 6 inches wide and 3 inches high.

Main part of bow:

Row 1: Ch 21, hdc in 3rd ch from the hook and across. Ch 2, turn. (20 hdc)

Row 2-7: Hdc across. Ch 2, turn. (20)

Do not ch 2 at the end of row 7. Ch 1, sc around putting 3 stitches in each corner to keep it even. Join to first sc with a sl st and finish off.

Weave in ends

Centre of bow:

Row 1: Ch 5, sc in 2nd ch from the hook and across. Ch 1, turn. (4 sc)

Row 2-8: Sc across. Ch 1, turn. (4)

Do not turn at the end of row 8. Ch 1, sc around putting 3 stitches in each corner to keep it even. Join to first sc with a sl st and finish off leaving a long tail for sewing to your item or clip.

I fold the centre of the bow (wrong side together) in half and sew up the side.

These are the two pieces you should now have.

Pinch the 3 middle rows together and bring the sides in like the top picture. Wrap the centre of the bow around the main part and stitch the ends together to secure it. Now you have a bow which can be sewed onto anything.

And just because you need to see how far I have actually come in a year. Yes I have only been doing this for  just over a year. I learned via Crafty Minx Crochet School.

Crochet hat and booties set

NEWBORN HAT AND BOOTIES SET

Booties

Materials

3.50 mm hook
DK Yarn - I used Olympus by Crucci
Scissors
Yarn needle
Tape Measure

0-3 months- fits 3.5'' foot

Pattern

DO NOT JOIN, MARK EACH ROUND WITH A STITCH MARKER.

Round 1: Ch 9, work 2 sc into the 2nd chain from the hook. Sc in next 4 stitches. Hdc in next 2 stitches. 8 hdc into the last chain. Now working along the other side of the chain. Hdc in next 2 stitches. Sc in next 4 stitches. 2 sc into the last chain. (24 sts)

Round 2: Work 2 sc into the first stitch, 2 sc into next stitch, sc in next 7. 2 sc in next 6 stitches. sc in next 7. 2 sc into each of the next 2 stitches. (34 sts)

Round 3: sc in next 2 stitches, 2 sc into the next stitch. sc in next 10 stitches. Put 2 sc into the next 2 stitches. sc in the next 4 stitches. Put 2 sc into the next 2 stitches. sc in the next 10 stitches. 2 sc into the next stitch. Sc in next 2 stitches. (40)

Sides:
Round 4: Join to first sc with a sl st, working in back loop only. Ch 1, sc in each stitch around. Join to first sc with a sl st (41)

Round 5: Ch 1, sc in same stitch as ch 1 and around. Join with a slip stitch. (41)

Round 6: Ch 1, hdc into the same st as ch 1, hdc around, join with a slip stitch to BLO of first hdc (41)

Round 7: WORKING IN BLO. Ch 1, sc in same stitch as ch 1, sc2tog, sc in next 8. Hdc in next stitch, dc2tog 9 times. Hdc in next stitch,  sc in next 7. Sc2tog, sc 1. Join to top of first sc with a slip stitch.. (30)

Round 8:  BACK WORKING IN BOTH LOOPS. Ch 1, sc in next 9, sc2tog 6 times, sc in next 9, Join first sc with a slip stitch (24)

Round 9: slip stitch around. Join with a slip stitch and finish off (24)

StrapYou may find the strap is too wide for your bootie. If this is the case reduce the amount of chains you start with.

Row 1: Ch 7, hdc in 3rd chain from the hook and across (6 hdc)

Row 2- 6 ch 2, turn. Hdc across (6)

Row 7: ch 1, sc in same stitch as ch 1. sc in next st, ch 2, skip 2, sc in next 2 stitches.

Sc evenly around the side, bottom and other side of the strap. Do not sc over the button hole.

Finish off, weave in all ends.

When sewing straps to booties put buttons on opposite sides. Buttons should be on the outside of the booties when worn.

Hat

Materials 

4.00mm hook

Yarn- DK,  I used Olympus by Crucci , 3 colours I used:

 Main - Blue

Contrasting - Black

Contrasting - Off white.

Scissors
Yarn needle
Tape Measure

2 dc cluster http://crochet.about.com/library/blcluster2.htm

Pattern

Pattern is worked with 2 strands held together

With blue.

Round 1: Starting with a magic circle, 10 hdc into circle, join with a slip stitch.

Round 2: Ch 2, hdc in same stitch as ch 2. 2 hdc in each stitch around, join with a slip stitch (20)

Round 3: Ch 2, hdc in same stitch as ch 2. *hdc, 2 hdc in next stitch* join with a slip stitch (30)

Round 4: Ch 2, hdc in same stitch as ch 2. * hdc in next 2 stitches, 2 hdc in next stitch around* Join with a slip stitch (40)

Increase rounds should measure 4 inches across

Round 5: Ch 2, dc cluster using same stitch as ch 2 and next stitch, ch 1. *2 dc cluster using next 2 stitches, ch 1* repeat around. Join with a slip stitch in first dc cluster (20 dc clusters, 20 chain stitches) Finish off

Round 6: Join black in the next chain stitch , ch 2, 2 dc cluster in the same ch space as ch 1, ch 1. * 2 dc cluster, ch 1 in next ch space* repeat. Join with a slip stitch in first dc cluster (20 2 dc clusters) Finish off

Round 7:  Join white in the next chain stitch , ch 2, 2 dc cluster in the same ch space as ch 1, ch 1. * 2 dc cluster, ch 1 in next ch space* repeat.  Join with a slip stitch in first dc cluster (20 2 dc clusters) finish off

Round 8:  Join black in the next chain stitch , ch 2, 2 dc cluster in the same ch space as ch 1, ch 1. * 2 dc cluster, ch 1 in next ch space* repeat.  Join with a slip stitch in first dc cluster (20 2 dc clusters) Finish off.

Round 9:  Join blue in the next chain stitch , ch 2, 2 dc cluster in the same ch space as ch 1, ch 1. * 2 dc cluster, ch 1 in next ch space* repeat. Join with a slip stitch in first dc cluster (20 2 dc clusters)

Round 10: ch 1, sc around. Join with a slip stitch. Finish off.

Weave in all ends if you didn't crochet over them.

Crochet Yoda Hat

Size 1-3 years based of this chart 
Has not been tested

NOTE: My patterns are free and I would like them to stay that way. You are free to print them out and pass them around but please make sure my blog address is somewhere on the pattern (http://knotyournanascrochet.blogspot.co.nz/) so that people know where the pattern originated. 

Please do not sell my patterns or say they are your own. You are free to do whatever you want with the finished item. If you are selling them online please link back the pattern and give me credit. I took the time to write this pattern out so the least you can do is take the small amount of time it takes to give me credit. 

Materials

4 mm crochet hook
Green DK 8 ply yarn
Scissors
Yarn needle

Pattern:

Hat:
(Ch 2 counts as the first dc in each round)

Starting with a magic circle

Round 1: Ch 2, 11 dc in circle. Join to top of ch 2 with a sl st.(12 dc)

Round 2: Ch 2, 2 dc in each st around. Join to top of ch 2 with a sl st (24 dc)

Round 3: Ch 2, dc in same st as ch 2, *dc in next st, 2 dc in next* around. Join to top of ch 2 with a sl st (36 dc)

Round 4: Ch 2, dc in same st as ch 2, dc in next 2 stitches, *2 dc in next stitch, dc in next 2 st* around. Join to top of ch 2 with a sl st (48 dc)

Round 5: Ch 2, dc in same stitch as dc, dc in next 3, *2 dc in next stitch, dc in next 3 stitches*around. Join to top of ch 2 with a sl st (60 dc)

^ This is your increase circle which should measure 5 1/2 inches for the size we are making.

Round 6-12: Ch 2, dc around, Join to top of ch 2 with a sl st. (60 stitches)

Round 13- 16 : Ch 1, sc in same stitch as ch 1 and around, join to first sc with a sl st. (60 sc)

Finish off and weave in ends.

Ears (make 2):

Working in continuous rounds.

Start with a magic circle:

Round 1: 6 sc into the circle. (6 sc)
Round 2: sc around (6 sc)
Round 3: 2 sc in next stitch, sc in next. (9 sc)
Round 4: sc around (9 sc)
Round 5: 2 sc in next st, sc in next (14 sc)
Round 6-10: sc around (14 sc)
Round 11:  2 sc in next st, sc in next (21 sc)
Round 12:  sc around (21 sc)
Round 13: 2 sc in next, sc in next 2 stitches (28)
Round 14-16: sc around (28)
Round 17: 2 sc in next stitch, sc in next 2 stitches (38)
Round 18-22 : sc around (38)
Round 23: sc2tog, 2 sc. (28)
Round 24: sc around (28)
Round 25: sc2tog, sc in next 2 stitches (21)
Round 26-27: sc around (21)

Finish off with a long tail for sewing.

Crochet Sheep Applique

Farm Blanket - Sheep Block

This it the first block in my farm themed blanket that I am making for the Te Puke A&P show home industries competition. It is currently being tested but the pattern will be available for sale soon. Each block measures 12 1/2 by 11 inches. The sheep measures 9 x 6 1/2 inches. Pattern will be available on Ravelry and Craftsy

First Paid Pattern

Up until now I have been writing my patterns and publishing them for free on here for you to enjoy but the other day my husband suggested I tried selling them so here is my first paid pattern.

http://www.ravelry.com/patterns/library/seat-belt-cozies

They are made for a car seat but can also be used on prams/strollers.

Newborn cupcake hat

NOTE: My patterns are free and I would like them to stay that way. You are free to print them out and pass them around but please make sure my blog address is somewhere on the pattern (http://knotyournanascrochet.blogspot.co.nz/) so that people know where the pattern originated. 

Please do not sell my patterns or say they are your own. You are free to do whatever you want with the finished item. If you are selling them online please link back the pattern and give me credit. I took the time to write this pattern out so the least you can do is take the small amount of time it takes to give me credit. 

Supplies

4mm and 3.5mm Hook
50g Dark Brown DK 8 ply
50g Pink DK 8 ply
(you probably won't even need that much)
Small amount of green and darker pink
Measuring tape
Stitch Marker

4mm hook
Do not join rounds, make sure you mark beginning with stitch marker

Round 1: Start with the magic circle (or chain ring), 8 sc into ring,
Round 2: 2 hdc in each stitch around (16)
Round 3: 2 hdc in next stitch, hdc in next stitch around (24)
Round 4: 2 hdc in next stitch, hdc in next 2 stitches. (32)
Round 5: 2 hdc in next stitch, hdc in next 3 stitches. (40)
Round 6: 2 hdc in next stitch, hdc in next 4 stitches. (48)
Round 7-10: hdc around
Round 11: In FLO, *sc, hdc, dc in first stitch, dc, hdc, sc in next stitch, sk1* repeat around. Sl Stitch into gap under last st as this will give you a more pronounced shell. Finish off.

Round 12: Join pink yarn to back loop of round 11, Ch 2, dc around (48) Join in top of ch 2
Tip: I ended up with a gap between my first and last stitch so I did a dc decrease to close the gap.
Round 13-16: Ch 2, *FPDC in next st, dc in next stitch* continue around. Join (48)
Round 17: Ch1, sc around. Finish off. When weaving in the ends I sewed the icing shells to the cupcake bottom so they didn stick out.

Flower and leaves
3.5mm hook

http://attic24.typepad.com/weblog/may-roses.html

I found it easier to sew the leaves onto the bottom of the flower and then sew the flower onto the hat

Sprinkles

Cut small pieces of darker pink yarn. Pull through yarn so you have 2 strand on the right side of the hat.

Tie as many knots for the size sprinkle you want.

Pull strands back to wrong side and make a double knot. Cut ends.

Crochet Dinosaur Hat/Photo Prop

NOTE: My patterns are free and I would like them to stay that way. You are free to print them out and pass them around but please make sure my blog address is somewhere on the pattern (http://knotyournanascrochet.blogspot.co.nz/) so that people know where the pattern originated. 

Please do not sell my patterns or say they are your own. You are free to do whatever you want with the finished item. If you are selling them online please link back the pattern and give me credit. I took the time to write this pattern out so the least you can do is take the small amount of time it takes to give me credit. 

Difficulty:
Beginner (Intermediate for size increase/decreases)

Materials:
 4.5mm, 5mm crochet hooks
DK yarn. I used Crucci Olympus
Yarn Needle
Tape Measure
Scissors

Gauge:
15st = 4 inches in the round (not increase rounds),
The diameter of beginning circle (rounds 1-5) = 4.8 inches

Size: Pattern has been written for 3 Months but instructions are included to increase size.

To increase/decrease the size of the hat I have given a size chart which you can use for the hat or you can use your own measurements. Chart can be found here, http://knotyournanascrochet.blogspot.co.nz/2012/03/modified-pineapple-stitch-hat.html

For a 3 month size I made the circumference of my increase circle 15 inches (diameter 4.8 inches) A great calculator for this is here http://math.about.com/library/blcirclecalculator.htm. I made the length of the hat 5.5 - 6 inches and the length from the bottom of the hat to the bottom of the tail 12 inches.

So for a newborn I would increase to a circumference of 12 inches or 3.8 inches in diameter. I would make the length of the hat 5 inches and the length from the bottom of hat to the tail 10 inches.

For 6 months I would increase to a circumference of 17 inches or 5.4 inches in diameter. Length of hat would be 6.5 inches and the measurement from bottom of hat to tail 14 inches.

For the starting width of the tail I started with just under half of the st for the hat so for example for the 3 month hat I started with 22 st and gradually decreased to 8 st's over the 12 inches of the tail. You will have to use your initiative when it comes to the other sizes.

I hope this makes sense, if not feel free to leave a comment or email me directly at kuddlynkute@gmail.com and I will try and answer any questions you have. All I ask is that you remember I am providing this pattern for free so I have not put a lot of time into making sure it is correct for each size.

Pattern:

Hat
Round 1: Starting with the magic circle, ch2, 9 hdc around. Join with a sl st in top of ch 2. (10hdc)
Round 2: Ch 2, hdc in same st as ch2, 2 hdc in each st around. Join with a sl st in top of ch 2. (20)
Round 3: Ch 2, hdc in same st as ch2, hdc in next st. * 2 hdc in next st, 1 hdc in next st* Repeat between * until end. Join with a sl st in top of ch 2. (30)
Round 4: Ch 2, hdc in same st as ch 2, hdc in next 2 st's. * 2 hdc in next st, hdc in next 2 st's* Repeat between * until end. Join with a sl st in top of ch 2. (40)
Round 5: Ch 2, hdc in same st as ch 2, hdc in next 3 st's. *2 hdc in next st, hdc in next 3 st's* Repeat between * until end. Join with a sl st in top of ch 2 (50)
Round 6- 13: hdc in each st (50) Finish off

Tail

I like to hide my seam behind the spikes so join your yarn again 11 stitches before you finished off.

Row 1: Ch 2, hdc in next 21 st's (22 st)
Row 2-3: Ch 2 turn, hdc across (22 st)
Row 4: Ch 2 turn, hdc2tog, hdc in next 16 st's, hdc2tog, hdc in last st (20)
Row 5-8: Ch 2 turn, hdc across (20)
Row 9: Ch 2, turn, hdc2tog, hdc in next 14, hdc2tog, hdc in last st. (18)
Row 10- 12: Ch2, turn, hdc across (18)
Row 13: Ch 2, turn, hdc2tog, hdc in next 12, hdc2tog, hdc in last st (16)
Row 14-16: Ch 2, turn, hdc across (16)
Row 17: Ch 2, turn, hdc2tog, hdc in next 10, hdc2tog, hdc in last st (14)
Row 18-24:Ch 2, turn, hdc across (14)
Row 25: Ch 2, turn, hdc2tog, hdc in next 8, hdc2tog, hdc in last st (12)
Row 26: Ch 2, turn, hdc across (10)
Row 27: Ch 2, turn, hdc2tog, hdc in next 6, hdc2tog, hdc in last st (10)
Row 28: Ch 2, turn, hdc2tog, hdc in next 4, hdc2tog, hdc in last st (8) Ch1 turn

Finish by sc around tail and hat.

Make spikes, I did 8 for size 3 months. Great pattern for spikes here http://www.theboytrifecta.com/2011/01/dino-spike-crochet-pattern.html I used a 4.5mm crochet hook

I stuffed my spikes but you don't have to.

Weave in ends and sew spikes on and your done :)

Please let me know if you find mistakes and remember to post photos to ravelry.

The easiest way to sew the spikes on is to fold the hat directly in half, you can thread a different colour yarn up the length of it to make it easier to place them. Then pin them on and sew them on with the yarn from the spikes. 

Modified Pineapple Stitch hat

Modified Pineapple Stitch Beanie

Picture of one with flap to come.....

Materials:

Size 7 (4.5mm) crochet hook or whatever you have

DK, 8ply Yarn or whatever you have

Yarn needle

Scissors

Sizing:

Any as we will be working on measurements J

Note:

This hat is worked in the round. The first Ch 2 of each round counts as the first hdc. Make sure to join each round with a sl st in the top of the first Ch 2. A video for the magic loop method can be found here: http://www.craftyminx.com/2011/10/crochet-school-lesson-16-working-in-the-round-1.html.

Here is a chart with measurements. You should increase until the Circumference is the same measurement as the size you are aiming for.

Hat height with brim allows the hat to be turned up about 1”

Hat circ should be 1 to 1 ½” smaller than the head circ

Hat Sizing Chart
Age/weight	Head Circ	Hat Circ	Hat height allowing for brim to be turned up.	Hat height without fold over brim.
1-2 Ibs (1kg)	9" - 10"  23-25cm	7.5" -8"  18-20 cm	3.5 - 4" 10cm	2.5 – 3”
2-3 Ibs (1.4kgs)	10" - 11 1/4"  25-28 cm	8.5" - 10" 22-25 cm	4" 10 cm	3”
4 - 5 lbs  2 kg	11 1/2" - 12 1/2"   28-33 cm	9" - 11.5" 23-28 cm	4 to 4.5"  10-11cm	3” – 3.5”
5 ½ - 6 lbs  2.7 kg	12 1/2" - 13"   31-33 cm	11" - 12" 28-33 cm	5 to 5.5" 13-15 cm	4 – 4.5”
Newborn	13" - 14 "  33-36cm	11.5" - 13"	5.5 to 6" 13-15 cm	4.5” - 6”
3-6 months	14" - 17 "   36-43 cm	12.5” – 16”	6.5 - 7" 15-18 cm	5.5 – 6”
6-12 months	16" - 19 "  41-48 cm	14.5 – 18”	7.5"  18 cm	6.5”
12 months – 3 years	18" to 20 " 46 -48 cm	16.5” – 19”	8” 20cm	7”
3-10 years	19" - 20 1/2"  48-51 cm	17.5 – 19.5”	8.5"   22cm	7.5”
Pre-teen - teen	20 1/2" - 22"   53 -56 cm	19 – 21”	9-10"  25 cm	8 – 9”
Adult Woman	21.5" - 22.5"	20” – 21.5”	11"	9"
Adult Man	23" - 24"  58.4 cm - 61 cm	21.5” – 23”	11"-11.5"	9.5" – 10.5”

Modified Pineapple Stitch (MPS) – Draw yarn through same sp as the last stitch in the previous cluster, draw through next 2 st, pull through all 4 loops on hook, chain 1 to close cluster.

Basically it is a 3sctog but the first loop is pulled through the same stitch as the last stitch in the previous cluster. The picture below shows the antique pineapple stitch, what we are doing differently is we are not missing a stitch but going into the stitch on top of the “V” in the picture (in between the last loop and middle loop). This will give it a "W" look instead.

Picture was found here http://www.freevintagecrochet.com/how-to-crochet/pineapple-stitch
Source: Woolco Knitting & Crocheting Manual

These are the circumferences I ended up with using a 4.5mm hook and DK yarn

Starting with 10 hdc

Round 3 = 7” 18cm

Round 4 = 10” 25.5cm

Round 5 = 12.5” 32cm

Round 6 = 14.5 37cm

Round 7 = 16.5 42cm

Increases about 2” each round

Starting with 12 hdc

Round 3 = 8.5” 22cm

Round 4 = 11” 28cm

Round 5 = 13.5” 35.5cm

Round 6 = 16” 41cm

Round 7=  18.5’ 47 cm

So each round is increasing 2.5”

Above is an example of how changing the number of st you start with can adjust the size of your increase circle.

Obviously if you are using yarn with a different weight or a different hook size your measurements will be different. Changing hook size can help with getting the correct size increase circle for the top of hat. Because everyone crochets with a different tension your measurements may end up being way off. That is why I have suggested using measurements rather than following an exact pattern.

A good tutorial for hat sizes can be found here:

Crochet a Basic Crown for a Beanie / hat Tutorial
http://www.youtube.com/watch?src_vid=I2kuMfmJHOc&feature=iv&v=sEwo1d8qGpo&annotation_id=annotation_748342

Crochet Beanie/Hat - Getting it to fit - Do's and Dont's
https://www.youtube.com/watch?v=I2kuMfmJHOc

Right lets start the pattern. You will stop when you feel your beanie is at the right circumference for the size you are making. A good tip is to measure each round. The MPS needs an even number of st to work.

Increase Rounds

Make a circle using the magic loop method or alternatively Ch 4 and join with a sl st in the first chain which will make a circle.

Round 1: Ch 2, (5, 7, 9,11 hdc in circle. (6, 8, 10, 12 hdc)

Round 2: Ch 2, 2 hdc in each st around. (12, 16, 20, 24 hdc)

Round 3: Ch 2, 2 hdc in next st, *Hdc in next st, 2 hdc in next* around.

Round 4: Ch 2, hdc in next st, 2 hdc in next st, *hdc in next 2 sts, 2 hdc in next st* around.

Round 5: Ch 2, hdc in next 2 sts, 2 hdc in next st, *hdc in next 3 sts, 2 hdc in next st*around.)

Round 6: Ch 2, hdc in next 3 sts, 2 hdc in next st, *hdc in next 4 sts, 2 hdc in next st* around.

Round 7: Ch 2, hdc in next 4 sts, 2 hdc in next st, * hdc in next 5 sts, 2 hdc in next st* around.

Round 8: Ch 2, hdc in next 5 sts, 2 hdc in next st, * hdc in next 6 sts, 2 hdc in next st* around. 

Keep increasing until it is the correct size for the hat you intend to make, I am sure you should have the pattern by now.

MPS rounds

1. To begin. Ch 1, Draw loop up through same sp as ch1, pull loop through next 2 st, draw yarn through all 4 loops on hook.

*Draw yarn through same sp as the last stitch in the previous cluster, draw through next 2 st, pull through all 4 loops on hook, chain 1 to close cluster.* Repeat until round is completed. Join with sl st in first stitch of round.

Start at 1 again.

Please let me know if you are having touble with this.

You will know if you have done something wrong as the MPS’s won’t line up.

Continue until piece is 1 ½ - 2 inches from the hat height without brim measurement for the size you are making. So for example you are making newborn size. You will to MPS rows until hat measures 3 - 4.5” from the crown of the hat (where you did your magic circle)

Hat brim

This can be done 2 different ways.

1. You can hdc 5-6 rows around or until hat measures the hat height without brim measurement for the size you are making. So for example a newborn hat you would hdc around until the hat measures 4.5” - 6” from the crown of the hat (where you did your magic circle)

2. You can add a flap which you can button down after (see photos). To do this finish off after your MPS rows. Lay hat flat with the joining seam down the side of the hat, attach yarn about 3 inches from the right side of the hat (really comes down to personal preference, Ch until the flap is the length you want it. Ch another 2. Hdc in the 3^rd ch from the hook, hdc around until you reach the beginning. Instead of joining ch1, turn. Continue doing this until hat measures the hat height without brim measurement for the size you are making. So for example a newborn hat you would hdc rows until the hat measures 4.5” - 6” from the crown of the hat (where you did your magic circle).

Now you can add buttons, a great tutorial for making buttons holes can be found here (yes it is a diaper cover but Clare does and awesome job of explaining how to do it) https://www.youtube.com/watch?v=9eRaGsoScnw&feature=relmfu you will find it at about 12.30mins. So basically you would do this along the side of the flap part. Then just sew on your buttons and weave in your ends and your done! Easy as that.

Another option is just to sew the buttons though the flap and onto the hat as it is not like you will undo the buttons at all it is just for looks.

I hope it makes sense. I tried to make it so everyone would understand including beginners but I may have written too much for those that have been crocheting for awhile.

Dog Hat

This pattern is no longer available please see my other character hats