Crochet Newborn Booties

Pattern for the hat can be found HERE

Baby Hat

My neighbor asked if I could make a hat and booties set for her sister who has a baby on the way. Not knowing the sex was hard but this is what I came up with. The ribbing makes it a stretchy hat so should fit a newborn for awhile. The ribbing for this hat was inspired by Busting Stitches Ribbed Hat  So if you are looking for a hat with single ribbing instead of double head over there :) She also has bigger sizes available. 

Pattern for booties can be found HERE

Bunny Paw Applique/Lucky Rabbit Foot

Cute little bunny applique perfect for putting on Easter items, it was inspired by this machine embroidery design I found on etsy http://www.etsy.com/listing/92337239/digidolls-easter-bunny-foot-print

Lucky Rabbit Foot

If you would like to see any other Easter themed free appliques leave a comment and I will see what I can do.

Size - 4 inches by 3 inches.

Size can easily be adjusted by using a smaller yarn and hook.

Crochet booties with strap: Free Pattern

I had to change my sole due to an issue so instead of just making a new sole I decided to make a new bootie pattern. Enjoy.

This pattern has not been tested

NOTE: My patterns are free and I would like them to stay that way. You are free to print them out and pass them around but please make sure my blog address is somewhere on the pattern (http://knotyournanascrochet.blogspot.co.nz/) so that people know where the pattern originated. 

Please do not sell my patterns or say they are your own. You are free to do whatever you want with the finished item. If you are selling them online please link back the pattern and give me credit. I took the time to write this pattern out so the least you can do is take the small amount of time it takes to give me credit.

Materials

3.50 mm hook
DK Yarn - I used Olympus by Crucci
Scissors
Yarn needle
Tape Measure

0-3 months- fits 3.5'' foot

Pattern

DO NOT JOIN, MARK EACH ROUND WITH A STITCH MARKER.

Round 1: Ch 9, work 2 sc into the 2nd chain from the hook. Sc in next 4 stitches. Hdc in next stitch, 2 hdc in next. 6 hdc in last ch. Now working along the other side of the chain. 2 hdc in next stitch, hdc in next. Sc in next 4 stitches. 2 sc into the last ch. (24 stitches)

Round 2: 2 sc into the first stitch, 2 sc into next stitch, sc in next 6. 2 sc in next stitch, sc in next, 2 sc in next 4 stitches. Sc in next stitch, 2 sc in next. sc in next 6. 2 sc into each of the last 2 stitches.. (34 sts)

Round 3: sc in next 2 stitches, 2 sc into the next stitch. sc in next 11 stitches. Put 2 sc into the next 2 stitches. sc in the next 2 stitches. Put 2 sc into the next 2 stitches. sc in the next 11 stitches. 2 sc into the next stitch. Sc in next 2 stitches. (40)

Sides:
Round 4: Join to first sc with a sl st, working in back loop only. Ch 1, sc in each stitch around. (41)

Round 5: Ch 1, sc in same stitch as ch 1 and around. Join with a slip stitch.  (41)

Round 6: ch 1, sc around, join with a slip stitch, ch 1, (41)

Round 7: sc around, join with a slip stitch, ch 1 (41)

Round 8: Sc in same stitch as ch 1, sc2tog, sc in next 8. Hdc in next stitch,

hdc2tog 9 times. Hdc in next stitch,  sc in next 7. Sc2tog, sc 1. Join to top of first sc with a slip stitch. Ch 1. (30)

Round 9: Sc in next 9, sc2tog 6 times, sc in next 9, Join first sc with a slip stitch (24)

Right bootie

Round 10: Sl st over next 8 stitches. Ch 6 (for strap) and 5 for button loop. Skip 5 chains and sc in 6^th chain from the hook. Sc in next 5 stitches (6 sc for strap) sl st into the next stitch on actual bootie. Continue sl sting around. Finish off and weave in ends. Attach button.

Left Bootie

Round 10: Sl st over next 16 stitches. Ch 6 (for strap) and 5 for button loop. Skip 5 chains and sc in 6^th chain from the hook. Sc in next 5 stitches (6 sc for strap) sl st into the next stitch on actual bootie. Continue sl stitching around (8). Finish off and weave in ends. Attach button.

If you are using a larger button ch more for the button loop so it will go around it.

Ruffle Hat (Diaper cover to come)

 (There is a hat under there, trust me :). I am hoping to eventually get some professional photos once I have made the diaper cover)

Newborn/3-6 Months

Materials

• Ruffle yarn of your choice – I used Fabulous Fibres Meshio in pink and purple. I worked the two meshes together. Any other ruffle yarn will work like Redheart Sashay and it is not necessary to work two together. I only did that because I noticed the Meshio was quite thin and I wanted a fuller look.
• DK/8ply yarn – I used Olympus by Crucci
• 4.50 mm hook, 5.00 mm 
• Scissors
• Cotton for sewing ruffle to hat and diaper cover
• Tape Measure

Hat Pattern – with DK yarn

Use 4.50mm hook for newborn. Use 5.00mm hook for 3-6 months.

Ch 2 counts as the first hdc in each round, place another hdc into the same stitch at the beginning of each round

Starting with a magic circle or ch 3, join with a slip stitch.

Round 1: Ch 2, 11 hdc in circle. Join to top of ch 2 with a slip stitch. (12 hdc)

Round 2: Ch 2, 2 hdc in each st around. Join to top of ch 2 with a slip stitch. (24 hdc)

Round 3: Ch 2, hdc in same st as ch 2, *hdc in next st, 2 hdc in next* around. Join to top of ch 2 with a slip stitch. (36 hdc)

Round 4: Ch 2, hdc in same st as ch 2, hdc in next 2 stitches, *2 hdc in next stitch, hdc in next 2 st* around. Join to top of ch 2 with a slip stitch. (48 hdc)

The diameter of this circle should measure:

Newborn - 4 inches.

3-6 months – 4.5 inches

Adjust hook size accordingly.

Round 4- 12: Ch 2, hdc around. Join to top of ch 2 with a slip stitch. (48 hdc)

Hat height – 4.5 inches.

Finish off, weave in ends.

3-6 Months only

Round: 13-14: Ch 2, hdc around. Join to top of ch 2 with a slip stitch. (48 hdc)

Hat height – 5.5 inches

Finish off, Weave in ends.

Ruffles:

As mentioned before I used two together but you can just use one if using a thicker brand. Brands like Redheart Sashay will have a solid edge. This will be the bottom of your ruffle. You will be working into the top.

Tip: You may find it easier to wind your yarn flat around something before starting rather than doing it as you go.

How to use ruffle yarn – Insert hook into the 4^th loop from the beginning. Pick up every second loop onto your hook until you have 10 loops on your hook. Turn your hook and pull the last loop through all the loops on the hook. Do this over and over again until you have enough to wrap around your hat To finish off, twist the end of the yarn and pull through the last loop on your hook.

A great video for this can be found here: http://www.youtube.com/watch?v=icgUxPI66KM&list=HL1353982206&feature=mh_lolz Thank you LeAnne Greene from L.A. Crochet on facebook for allowing me to use this video.

Sewing ruffles to hat:

Pin ruffles to the hat starting from the bottom up MAKE SURE TO KEEP COUNT OF YOUR PINS! Work in a spiral until you reach the top. Position ruffles so that the join is not showing.

Minnie Hat

NOTE: My patterns are free and I would like them to stay that way. You are free to print them out and pass them around but please make sure my blog address is somewhere on the pattern (http://knotyournanascrochet.blogspot.co.nz/) so that people know where the pattern originated. 

Please do not sell my patterns or say they are your own. You are free to do whatever you want with the finished item. If you are selling them online please link back the pattern and give me credit. I took the time to write this pattern out so the least you can do is take the small amount of time it takes to give me credit. 

Size - Newborn



Materials

4.50 mm hook
DK Yarn - I used Olympus by Crucci
Scissors
Yarn needle
Tape Measure

Pattern

Hat

With white

Round 1: Starting with a magic circle, 10 hdc into circle, join with a slip stitch.

Round 2: Ch 2, hdc in same stitch as ch 2. 2 hdc in each stitch around, join with a slip stitch (20)

Round 3: Ch 2, hdc in same stitch as ch 2. *hdc, 2 hdc in next stitch* join with a slip stitch (30)

Round 4: Ch 2, hdc in same stitch as ch 2. * hdc in next 2 stitches, 2 hdc in next stitch around* Join with a slip stitch (40)

Round 5:  Ch 2, hdc in same stitch as ch 2. * hdc in next 3 stitches, 2 hdc in next stitch around* Join with a slip stitch (50)

Increase rounds should measure 4 inches across

Round 6-11: Hdc around. Join with a slip stitch. (50)

With Pink

Round 12-14: ch 1, sc around. join with a slip stitch. 

Finish off.

Weave in ends

Ears

With black

Round 1: Starting with a magic circle, 8 hdc into circle, join with a slip stitch.

Round 2: Ch 2, hdc in same stitch as ch 2. 2 hdc in each stitch around, join with a slip stitch (16)

Round 3: Ch 2, hdc in same stitch as ch 2. *hdc, 2 hdc in next stitch* join with a slip stitch (24)

Round 4: Ch 2, hdc in same stitch as ch 2. * hdc in next 2 stitches, 2 hdc in next stitch around* Join with a slip stitch (32) Finish off leaving a long tail for sewing.

Bow

With pink

Row 1: Ch 21, hdc in 3rd ch from the hook and across (20 hdc)

Row 2 - 7 : ch 2, turn. Hdc across.

Sc around. finish off

Centre of bow

Row 1: Ch 5, sc in 2nd ch from the hook and across. (4 sc)

Row 2 - 8 :Ch 1, turn. sc across. (4 sc)

Sc around: Finish off leaving a tail for sewing. Sew buttons on.

Weave in all ends and sew together according to picture.

Bunny Slippers

NOTE: My patterns are free and I would like them to stay that way. You are free to print them out and pass them around but please make sure my blog address is somewhere on the pattern (www.knotyournanascrochet.com) so that people know where the pattern originated. 

Please do not sell my patterns or say they are your own. You are free to do whatever you want with the finished item. If you are selling them online please link back the pattern and give me credit. I took the time to write this pattern out so the least you can do is take the small amount of time it takes to give me credit. 

Materials

3.50 mm hook
DK Yarn - I used Olympus by Crucci
Scissors
Yarn needle
Tape Measure

0-3 months- fits 3.5'' foot

Pattern

DO NOT JOIN, MARK EACH ROUND WITH A STITCH MARKER.

Round 1: Ch 9, work 2 sc into the 2nd chain from the hook. Sc in next 4 stitches. Hdc innext stitch, 2 hdc in next. 6 hdc in last ch. Now working along the other side of the chain. 2 hdc in next stitch, hdc in next. Sc in next 4 stitches. 2 sc into the last ch. (24 stitches)

Round 2: 2 sc into the first stitch, 2 sc into next stitch, sc in next 6. 2 sc in next stitch, sc in next, 2 sc in next 4 stitches. Sc in next stitch, 2 sc in next. sc in next 6. 2 sc into each of the last 2 stitches.. (34 sts)

Round 3: sc in next 2 stitches, 2 sc into the next stitch. sc in next 11 stitches. Put 2 sc into the next 2 stitches. sc in the next 2 stitches. Put 2 sc into the next 2 stitches. sc in the next 11 stitches. 2 sc into the next stitch. Sc in next 2 stitches. (40)

Sides:

Round 4: Join to first sc with a sl st, working in back loop only. Ch 1, sc in each stitch around. (41)

Round 5: Ch 1, sc in same stitch as ch 1 and around. Join with a slip stitch. Ch 1(41)

Round 6: sc around, join with a slip stitch, ch 1, (41)

Round 7: sc around, join with a slip stitch, ch 1 (41)


Round 8: Sc in same stitch as ch 1, sc2tog, sc in next 8. Hdc in next stitch, hdc2tog 9 times. Hdc in next stitch,  sc in next 7. Sc2tog, sc 1. Join to top of first sc with a slip stitch. Ch 1. (30)

Round 9: Sc in next 9, sc2tog 6 times, sc in next 9, Join first sc with a slip stitch (24)

Round 10: Sc in next 9, sc2tog 3 times, sc in next 9. Join to first sc with a slip stitch (21)

Ears - Make 4

Working in the round, mark first stitch with marker. 

Round 1: Ch 4, sc in 2nd chain from the hook, sc in next stitch. 3 sc in last stitch. Working along back of ch. Sc in next 2. 2 sc in last stitch. 

Round 2: sc in next 2 stitches, 2 sc in each of the next 3 stitches. Sc in next 4 stitches,

Round 3: sc in next 12. Do not join. 

I surface slip stitched a half circle in the middle of the ears but this is not necessary.

Make two 4cm pom poms

Weave in ends, embroider face and sew ears and pom poms on. Add yarn bows and you’re finished.

Crochet hat and booties set

NEWBORN HAT AND BOOTIES SET

Booties

Materials

3.50 mm hook
DK Yarn - I used Olympus by Crucci
Scissors
Yarn needle
Tape Measure

0-3 months- fits 3.5'' foot

Pattern

DO NOT JOIN, MARK EACH ROUND WITH A STITCH MARKER.

Round 1: Ch 9, work 2 sc into the 2nd chain from the hook. Sc in next 4 stitches. Hdc in next 2 stitches. 8 hdc into the last chain. Now working along the other side of the chain. Hdc in next 2 stitches. Sc in next 4 stitches. 2 sc into the last chain. (24 sts)

Round 2: Work 2 sc into the first stitch, 2 sc into next stitch, sc in next 7. 2 sc in next 6 stitches. sc in next 7. 2 sc into each of the next 2 stitches. (34 sts)

Round 3: sc in next 2 stitches, 2 sc into the next stitch. sc in next 10 stitches. Put 2 sc into the next 2 stitches. sc in the next 4 stitches. Put 2 sc into the next 2 stitches. sc in the next 10 stitches. 2 sc into the next stitch. Sc in next 2 stitches. (40)

Sides:
Round 4: Join to first sc with a sl st, working in back loop only. Ch 1, sc in each stitch around. Join to first sc with a sl st (41)

Round 5: Ch 1, sc in same stitch as ch 1 and around. Join with a slip stitch. (41)

Round 6: Ch 1, hdc into the same st as ch 1, hdc around, join with a slip stitch to BLO of first hdc (41)

Round 7: WORKING IN BLO. Ch 1, sc in same stitch as ch 1, sc2tog, sc in next 8. Hdc in next stitch, dc2tog 9 times. Hdc in next stitch,  sc in next 7. Sc2tog, sc 1. Join to top of first sc with a slip stitch.. (30)

Round 8:  BACK WORKING IN BOTH LOOPS. Ch 1, sc in next 9, sc2tog 6 times, sc in next 9, Join first sc with a slip stitch (24)

Round 9: slip stitch around. Join with a slip stitch and finish off (24)

StrapYou may find the strap is too wide for your bootie. If this is the case reduce the amount of chains you start with.

Row 1: Ch 7, hdc in 3rd chain from the hook and across (6 hdc)

Row 2- 6 ch 2, turn. Hdc across (6)

Row 7: ch 1, sc in same stitch as ch 1. sc in next st, ch 2, skip 2, sc in next 2 stitches.

Sc evenly around the side, bottom and other side of the strap. Do not sc over the button hole.

Finish off, weave in all ends.

When sewing straps to booties put buttons on opposite sides. Buttons should be on the outside of the booties when worn.

Hat

Materials 

4.00mm hook

Yarn- DK,  I used Olympus by Crucci , 3 colours I used:

 Main - Blue

Contrasting - Black

Contrasting - Off white.

Scissors
Yarn needle
Tape Measure

2 dc cluster http://crochet.about.com/library/blcluster2.htm

Pattern

Pattern is worked with 2 strands held together

With blue.

Round 1: Starting with a magic circle, 10 hdc into circle, join with a slip stitch.

Round 2: Ch 2, hdc in same stitch as ch 2. 2 hdc in each stitch around, join with a slip stitch (20)

Round 3: Ch 2, hdc in same stitch as ch 2. *hdc, 2 hdc in next stitch* join with a slip stitch (30)

Round 4: Ch 2, hdc in same stitch as ch 2. * hdc in next 2 stitches, 2 hdc in next stitch around* Join with a slip stitch (40)

Increase rounds should measure 4 inches across

Round 5: Ch 2, dc cluster using same stitch as ch 2 and next stitch, ch 1. *2 dc cluster using next 2 stitches, ch 1* repeat around. Join with a slip stitch in first dc cluster (20 dc clusters, 20 chain stitches) Finish off

Round 6: Join black in the next chain stitch , ch 2, 2 dc cluster in the same ch space as ch 1, ch 1. * 2 dc cluster, ch 1 in next ch space* repeat. Join with a slip stitch in first dc cluster (20 2 dc clusters) Finish off

Round 7:  Join white in the next chain stitch , ch 2, 2 dc cluster in the same ch space as ch 1, ch 1. * 2 dc cluster, ch 1 in next ch space* repeat.  Join with a slip stitch in first dc cluster (20 2 dc clusters) finish off

Round 8:  Join black in the next chain stitch , ch 2, 2 dc cluster in the same ch space as ch 1, ch 1. * 2 dc cluster, ch 1 in next ch space* repeat.  Join with a slip stitch in first dc cluster (20 2 dc clusters) Finish off.

Round 9:  Join blue in the next chain stitch , ch 2, 2 dc cluster in the same ch space as ch 1, ch 1. * 2 dc cluster, ch 1 in next ch space* repeat. Join with a slip stitch in first dc cluster (20 2 dc clusters)

Round 10: ch 1, sc around. Join with a slip stitch. Finish off.

Weave in all ends if you didn't crochet over them.

Crochet Sheep Applique

Farm Blanket - Sheep Block

This it the first block in my farm themed blanket that I am making for the Te Puke A&P show home industries competition. It is currently being tested but the pattern will be available for sale soon. Each block measures 12 1/2 by 11 inches. The sheep measures 9 x 6 1/2 inches. Pattern will be available on Ravelry and Craftsy

Newborn cupcake hat

NOTE: My patterns are free and I would like them to stay that way. You are free to print them out and pass them around but please make sure my blog address is somewhere on the pattern (http://knotyournanascrochet.blogspot.co.nz/) so that people know where the pattern originated. 

Please do not sell my patterns or say they are your own. You are free to do whatever you want with the finished item. If you are selling them online please link back the pattern and give me credit. I took the time to write this pattern out so the least you can do is take the small amount of time it takes to give me credit. 

Supplies

4mm and 3.5mm Hook
50g Dark Brown DK 8 ply
50g Pink DK 8 ply
(you probably won't even need that much)
Small amount of green and darker pink
Measuring tape
Stitch Marker

4mm hook
Do not join rounds, make sure you mark beginning with stitch marker

Round 1: Start with the magic circle (or chain ring), 8 sc into ring,
Round 2: 2 hdc in each stitch around (16)
Round 3: 2 hdc in next stitch, hdc in next stitch around (24)
Round 4: 2 hdc in next stitch, hdc in next 2 stitches. (32)
Round 5: 2 hdc in next stitch, hdc in next 3 stitches. (40)
Round 6: 2 hdc in next stitch, hdc in next 4 stitches. (48)
Round 7-10: hdc around
Round 11: In FLO, *sc, hdc, dc in first stitch, dc, hdc, sc in next stitch, sk1* repeat around. Sl Stitch into gap under last st as this will give you a more pronounced shell. Finish off.

Round 12: Join pink yarn to back loop of round 11, Ch 2, dc around (48) Join in top of ch 2
Tip: I ended up with a gap between my first and last stitch so I did a dc decrease to close the gap.
Round 13-16: Ch 2, *FPDC in next st, dc in next stitch* continue around. Join (48)
Round 17: Ch1, sc around. Finish off. When weaving in the ends I sewed the icing shells to the cupcake bottom so they didn stick out.

Flower and leaves
3.5mm hook

http://attic24.typepad.com/weblog/may-roses.html

I found it easier to sew the leaves onto the bottom of the flower and then sew the flower onto the hat

Sprinkles

Cut small pieces of darker pink yarn. Pull through yarn so you have 2 strand on the right side of the hat.

Tie as many knots for the size sprinkle you want.

Pull strands back to wrong side and make a double knot. Cut ends.

Crochet Dinosaur Hat/Photo Prop

NOTE: My patterns are free and I would like them to stay that way. You are free to print them out and pass them around but please make sure my blog address is somewhere on the pattern (http://knotyournanascrochet.blogspot.co.nz/) so that people know where the pattern originated. 

Please do not sell my patterns or say they are your own. You are free to do whatever you want with the finished item. If you are selling them online please link back the pattern and give me credit. I took the time to write this pattern out so the least you can do is take the small amount of time it takes to give me credit. 

Difficulty:
Beginner (Intermediate for size increase/decreases)

Materials:
 4.5mm, 5mm crochet hooks
DK yarn. I used Crucci Olympus
Yarn Needle
Tape Measure
Scissors

Gauge:
15st = 4 inches in the round (not increase rounds),
The diameter of beginning circle (rounds 1-5) = 4.8 inches

Size: Pattern has been written for 3 Months but instructions are included to increase size.

To increase/decrease the size of the hat I have given a size chart which you can use for the hat or you can use your own measurements. Chart can be found here, http://knotyournanascrochet.blogspot.co.nz/2012/03/modified-pineapple-stitch-hat.html

For a 3 month size I made the circumference of my increase circle 15 inches (diameter 4.8 inches) A great calculator for this is here http://math.about.com/library/blcirclecalculator.htm. I made the length of the hat 5.5 - 6 inches and the length from the bottom of the hat to the bottom of the tail 12 inches.

So for a newborn I would increase to a circumference of 12 inches or 3.8 inches in diameter. I would make the length of the hat 5 inches and the length from the bottom of hat to the tail 10 inches.

For 6 months I would increase to a circumference of 17 inches or 5.4 inches in diameter. Length of hat would be 6.5 inches and the measurement from bottom of hat to tail 14 inches.

For the starting width of the tail I started with just under half of the st for the hat so for example for the 3 month hat I started with 22 st and gradually decreased to 8 st's over the 12 inches of the tail. You will have to use your initiative when it comes to the other sizes.

I hope this makes sense, if not feel free to leave a comment or email me directly at kuddlynkute@gmail.com and I will try and answer any questions you have. All I ask is that you remember I am providing this pattern for free so I have not put a lot of time into making sure it is correct for each size.

Pattern:

Hat
Round 1: Starting with the magic circle, ch2, 9 hdc around. Join with a sl st in top of ch 2. (10hdc)
Round 2: Ch 2, hdc in same st as ch2, 2 hdc in each st around. Join with a sl st in top of ch 2. (20)
Round 3: Ch 2, hdc in same st as ch2, hdc in next st. * 2 hdc in next st, 1 hdc in next st* Repeat between * until end. Join with a sl st in top of ch 2. (30)
Round 4: Ch 2, hdc in same st as ch 2, hdc in next 2 st's. * 2 hdc in next st, hdc in next 2 st's* Repeat between * until end. Join with a sl st in top of ch 2. (40)
Round 5: Ch 2, hdc in same st as ch 2, hdc in next 3 st's. *2 hdc in next st, hdc in next 3 st's* Repeat between * until end. Join with a sl st in top of ch 2 (50)
Round 6- 13: hdc in each st (50) Finish off

Tail

I like to hide my seam behind the spikes so join your yarn again 11 stitches before you finished off.

Row 1: Ch 2, hdc in next 21 st's (22 st)
Row 2-3: Ch 2 turn, hdc across (22 st)
Row 4: Ch 2 turn, hdc2tog, hdc in next 16 st's, hdc2tog, hdc in last st (20)
Row 5-8: Ch 2 turn, hdc across (20)
Row 9: Ch 2, turn, hdc2tog, hdc in next 14, hdc2tog, hdc in last st. (18)
Row 10- 12: Ch2, turn, hdc across (18)
Row 13: Ch 2, turn, hdc2tog, hdc in next 12, hdc2tog, hdc in last st (16)
Row 14-16: Ch 2, turn, hdc across (16)
Row 17: Ch 2, turn, hdc2tog, hdc in next 10, hdc2tog, hdc in last st (14)
Row 18-24:Ch 2, turn, hdc across (14)
Row 25: Ch 2, turn, hdc2tog, hdc in next 8, hdc2tog, hdc in last st (12)
Row 26: Ch 2, turn, hdc across (10)
Row 27: Ch 2, turn, hdc2tog, hdc in next 6, hdc2tog, hdc in last st (10)
Row 28: Ch 2, turn, hdc2tog, hdc in next 4, hdc2tog, hdc in last st (8) Ch1 turn

Finish by sc around tail and hat.

Make spikes, I did 8 for size 3 months. Great pattern for spikes here http://www.theboytrifecta.com/2011/01/dino-spike-crochet-pattern.html I used a 4.5mm crochet hook

I stuffed my spikes but you don't have to.

Weave in ends and sew spikes on and your done :)

Please let me know if you find mistakes and remember to post photos to ravelry.

The easiest way to sew the spikes on is to fold the hat directly in half, you can thread a different colour yarn up the length of it to make it easier to place them. Then pin them on and sew them on with the yarn from the spikes.